DHCP is full and connect to my Forewall remotely

[vak0]

Hi Guys,

I just enrolled in to the course recently and i was given a task at work to try and connect to my firewall remotely and some of my clients are not connecting to the network due to insufficient IP's.

Any suggestion?

Rgards

[AEK · Accepted solution]

Hi Vak

In some cases reducing DHCP lease may help, e.g.: you may set it to 1 day, while the default is 7 days.

If it doesn't help then you need to set a larger subnet for your interface, e.g.: use /23 instead of /24.

[vak0]

Hi AEK,

I managed, thank you. I just changed the subnet and reduced the Lease to 14400 seconds. 

Regards,