DHCP exclusions more than three subnets

[ABUELKHAIR]

I am moving the DHCP from the windows server to the Fortigate, and the existing DHCP exclusions are more that three subnets like 6 

In the GUI configuration i can add only three exclusions, can i add more using the command like when i configure the DHCP or still limited to three ?

Thanks

[anikolov · Accepted solution]

Hello Abuelkhair,

I have tried the same in the lab for 7.0.6 version but it does not seems possible, only 3 ranges are allowed:

I get this output: edit 0
Command fail. Return code -4 (reached the maximum number of entries)

On which version are you? What is the hardware?

Regards,

[ABUELKHAIR]

To be more specific i can add three ranges only but i need to add 6 ranges so can i do that from the command line or still limited to 3

[anikolov · Accepted solution]

Hello Abuelkhair,

I have tried the same in the lab for 7.0.6 version but it does not seems possible, only 3 ranges are allowed:

I get this output: edit 0
Command fail. Return code -4 (reached the maximum number of entries)

On which version are you? What is the hardware?

Regards,

[ABUELKHAIR]

@anikolov Yes its limited to 3 only regardless to the firmware or model

[bpozdena_FTNT · Accepted solution]

Please note that you can't configure more than 3 DHCP IP ranges on any Fortigate model or FortiOS version.

You can verify limits in the Maximum Values Table. 

[ABUELKHAIR]

@bpozdena_FTNT 

Thank you very much! that was really helpful