Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Maxim_Vanichkin
New Contributor II

DHCP and LTE on 30e

Dear Fortinet Community!

FWF30E-3G4G (6.2.10)  is using onboard LTE modem with SDWAN. It works only with direct routes, and doesn't work  with static route sdwan--> 0.0.0.0. LTE gets dhcp address with /32 mask - so there is no any gateway... If I downgrade it to 6.2.9 - everything is fine, LTE gets /30 address with normal gateway. Asking here to see if anybody recently had this issue. Thanks!

Interface.JPGsdwan.JPG

1 Solution
AlexC-FTNT
Staff
Staff

Nevermind, found the bug 745856; 

Resolved In 7.0.6, 7.2.0. Waiting for a fix in 6.4.10.

No fix in 6.2.10 (out of Eng. Support).


- Toss a 'Like' to your fixxer, oh Valley of Plenty! and chose the solution, too00oo -

View solution in original post

3 REPLIES 3
AlexC-FTNT
Staff
Staff

Check first if the gateway is received by LTE and if the route is added to routing table:

#diagnose sys lte-modem data-session-info

#get router info routing-table database


- Toss a 'Like' to your fixxer, oh Valley of Plenty! and chose the solution, too00oo -
AlexC-FTNT
Staff
Staff

Nevermind, found the bug 745856; 

Resolved In 7.0.6, 7.2.0. Waiting for a fix in 6.4.10.

No fix in 6.2.10 (out of Eng. Support).


- Toss a 'Like' to your fixxer, oh Valley of Plenty! and chose the solution, too00oo -
Maxim_Vanichkin

Alex! Thank you very much! Workaround is to add RANDOM hahaha gateway to wwan and priority at 100. ))) Awesome

Labels
Top Kudoed Authors