DHCP Scope not providing IP addresses

[mohiudeenpl]

I have configured DHCP scope in Fortinet firewall of range 10.108.120.100-10.108.122.254 /22 which can give nearly 1024 IP address.But.After DHCP scope leased 665 IP addresses,Scope is showing 100% and clients are not getting IP address.

Could anyone help me out how to fix the issue.Need to get more IP addresses.Thanks

[jintrah_FTNT · Accepted solution]

Hi,

You have specified a range of ip address for lease, and I see its used.

 IP addresses available for lease in the range 10.108.120.100-10.108.122.254

10.108.120.100-10.108.120.255 -->156 IP addresses

10.108.121.0-10.108.121.255 --> 256 IP addresses

10.108.122.0 -10.108.122.254 --> 255 IP addresses

So 665 IP addresses are leased from a total of 667 IP addresses already. You can increase the scope for more clients.

best regards,

Jin

[mohiudeenpl]

I would like to block all the VPN softwares in mobile device.Please let me know how to do this.

[jintrah_FTNT]

Hi,

Please check existing threads, if not finding any relevant info, please start a new one.

Best regards,

Jin