Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
80211WiGuy
New Contributor III

DC Power connector type on FG - 60F / 80F ?

Hello,

I'm hoping to find any information on the type of connector used on the end of the AC/DC power supply provided with these firewalls.

We have our own fully redundant DC power plant at some sites that we'd like to connect directly to 12VDC without the need for the AC adapter - doesnt make sense for us to go from AC->RedundantDC->Inverter->AC-adapter->FG60F.

 

We'd like to source our own part so that we can go AC->RedundantDC->12V->FG60F

1 Solution
ozkanaltas
Valued Contributor III

Hello @80211WiGuy ,

 

The connector used for these devices is called "Mini Fit Jr 2x1 Polarity".

 

https://www.reichelt.com/de/en/molex-crimp-housing-mini-fit-jr-2x1-pin-socket-molex-39012020-p185701...

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW

View solution in original post

If you have found a solution, please like and accept it to make it easily accessible to others.NSE 4-5-6-7 OT Sec - ENT FW
2 REPLIES 2
ozkanaltas
Valued Contributor III

Hello @80211WiGuy ,

 

The connector used for these devices is called "Mini Fit Jr 2x1 Polarity".

 

https://www.reichelt.com/de/en/molex-crimp-housing-mini-fit-jr-2x1-pin-socket-molex-39012020-p185701...

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW
If you have found a solution, please like and accept it to make it easily accessible to others.NSE 4-5-6-7 OT Sec - ENT FW
80211WiGuy

Wow that was fast!  Thank you@ozkanaltas!

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors