Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
HS08
Contributor

Current Bandwith Monitor

Hello,

For each firewall rule we can see the Current Bandwidth like pic below.

Is the current bandwidth can be monitored by SNMP manager? What OID for getting this value?

 

 

fortinet.png

5 REPLIES 5
dbhavsar
Staff
Staff

Hello @HS08 ,

 

Below oids can be used

IF-MIB:interfaces.ifTable.ifEntry.ifInOctets          - 1.3.6.1.2.1.2.2.1.10

IF-MIB:interfaces.ifTable.ifEntry.ifOutOctets        -1.3.6.1.2.1.2.2.1.16

you can still download MIB file and verify this OIDs

DNB
HS08

HI,  This is oid for interface utilization and not per rules.

AEK
SuperUser
SuperUser

Hi

In addition to dbhavsar suggestion, as per my knowledge this info is only available per interface, not per firewall rule.

AEK
AEK
HS08
Contributor

correct, what i want is per fw rule

ebilcari
Staff
Staff

It seems that the SNMP OID currently support these counters [.1.3.6.1.4.1.12356.101.5.1.2.1.1]:

  • fgFwPolPktCount
  • fgFwPolByteCount
  • fgFwPolLastUsed
  • fgFwPolPktCountHc
  • fgFwPolByteCountHc

 

The nearest value you can use is OID: .1.3.6.1.4.1.12356.101.5.1.2.1.1.6.1[.10]
Value: 189386274

total bytes.PNG

Maybe you can use it in a script in your monitoring system to convert the difference of the total traffic in time and generate an approximate value of bandwidth used during that time.

- Emirjon
If you have found a solution, please like and accept it to make it easily accessible for others.
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors