Connection Failed CLI

[JMelo]

Hi !

Im having a problem connecting to the CLI Console.

After connecting to the equipment via HTTPS I try to access the CLI console and return "Connection Failed" (Print)

Access to the equipment by SSH is ok!

Has anyone had the same problem?

FortiOS v5.6.12 build1701

Thanks!

[timonb]

We have same problem. Forti 200D v6.0.11 build0387

Is there any solution?

[emnoc]

1st upgrade that code

The console is probably disable and needs to be enable

Find this line once you ssh into the device and toggle it to enable

config system console set mode line set baudrate 9600 set output more set login disable set fortiexplorer enable end

Ken Felix

[timonb]

Dear Ken Felix,

Thank you very much for your help.

I tried these commands SSH login, and after it I checked the result.

Unfortunatelly it is still same.

What should I do further?

[emnoc]

reboot or upgrade or both?

Ken Felix

[timonb]

Thank you for for help.

We would fix it without reboot (if it is possible!), because that cause a few minutes outage in the service, and our company do not prefer any outage. :(

Upgrade: we upgraded in July, and there is no newer release. On the support site the latest firmware: v6.0.11 build0387