Connection Between Fortigate, FortiSwitch and Cisco Switch

Bibek · ‎05-12-2024

If i connect Fortigate firewall and Cisco Switch and then a fortiSwitch is connected to the Cisco Switch, in this case will the fortiswitch work?
in my case FortiSwitch device is detected in Fortilink interface but fortiSwitch remains offline?

Bibek

lgupta · ‎05-12-2024

Hello Bibek, Good day!

Yes. You can still add the FortiSwitch as long as you have Security-Fabric enabled for Admin access on the VLAN interface where you have the FortiSwitch connected through the Cisco Switch.

Thank you!

Best regards,

-lgupta

If you feel the above steps helped to resolve the issue mark the reply as solved so that other customers can get it easily while searching on similar scenarios.

ozkanaltas · ‎05-12-2024

You can review this article. This article can solve your problem.

And also for fortilink uses vlan4094 on native status. If you can set it to pass the 4094 VLAN on the Cisco switch, this may solve your problem.

https://docs.fortinet.com/document/fortiswitch/7.2.1/fortilink-guide/801183/fortilink-over-a-point-t...

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW

omerfg34 · ‎08-13-2024

Hi all,

Connection Between Fortigate, FortiSwitch and Cisco Switch

Nominate a Forum Post for Knowledge Article Creation