Connect vpn IPsec client via command line...

[luccosen]

Connect vpn IPsec via command line...

I'm using de forticlient  to connecto to a IPsec vpn site, there is any way to do this via command line? because I will use this via Securden PAM to connect, . Can't find any documentation or post with this information. Now I'm using via sslvpn....

[Atul_S]

Hi,

I suspect if this can only be acheived using a paid version of the FortiClient but you can try the below steps:

-Navigate to the installation path for the FCT in the command prompt.

-Try use the command ipsec.exe <tunnel name>

I have tested this and it seems to be working. But I am using the paid version.

Thanks,

[Atul_S]

Hi,

Pls review the below link for more info:

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-start-a-Dial-up-IPsec-tunnel-from/t...

Thanks,

[luccosen]

Thanks. 

but you suggestion in a trial 7.4.4 client not work... 

[Atul_S]

Hi,

I am sure that this will work with the paid version, but I am unable ot test this with a free version yet. However, I suspect it won't work if you don't have a paid license.

Thanks,

[rosatechnocrat]

@luccosen : I have tested this in Free Version as well.  This CLI works on Free version 

[Atul_S]

Hi,

That's great and thanks for the confirmation.

Its good to know that the earlier response with the link has solved the problem irrespective of the license status. Pls consider mark the initial response as a solution :)

Thanks,