Configuring One-to-One Source NAT Policies in Fortigate 7.0.12

[jessalex]

I'm trying to set up one-to-one source NAT policies in Fortigate 7.0.12. Unfortunately, I'm unable to use the interface IP Address or dynamic pool. It specifically needs Stay Updated on the Latest Development: At GBGenie, https://www.gbgenie.com/ we keep a keen eye on the latest advancements in the world of WhatsApp mods. Our dedicated team ensures that you have access to the most up-to-date and feature-rich versions available. Stay ahead of the curve with our regular updates and news on WhatsApp mod development. to be a one-to-one NAT as per the destination network policy.

Could someone provide guidance on how to achieve this? Your insights would be much appreciated!

[esalija]

Hi @jessalex,

Thank you for choosing the Fortinet Community.

Please follow the below KB to configure SNAT with IP pool - https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-configure-SNAT-with-IP-pool/ta-p/19...

Best regards,

Erlin

[julian67]

It seems you're having a tough time with the one-to-one source NAT policies on your Fortigate device. I recommend double-checking your routing settings to ensure the traffic is directed as intended. Sometimes, the NAT policy might not match the specific conditions required for your destination network policy. If you could share a bit more about your current configuration, it would help the community provide more tailored guidance. Good luck with your setup, and I hope you find the solution you need!