Configure one rule to allow multiple vlans to comunicate to one

[Chivigone75]

Hello Team

I created 6 VLANs on an interface, I want to configure a rule to communicate 5 VLANs to one, but I can't find how to do it. The single way is set one by one rule. Does anyone know how I can do this?

Regards

[Toshi_Esumi]

If those all 5 VLANs need to have exactly the same policies to the other VLAN, and to the internet, you can bind them into one "zone" to set policies from/to the zone.
https://docs.fortinet.com/document/fortigate/7.4.4/administration-guide/116821/zone

Keep it in mind that once those 5 VLAN interfaces are in one zone, you can't use those individual VLAN interfaces in any policies.

Toshi

[hbac · Accepted solution]

Hi @Chivigone75,

You can also enable Multiple Interface Policies feature by following this article: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-allow-the-configuration-of-policies...

Regards, 

[Chivigone75]

It´s GREAT !!!, Is working. Thanks a lot

Regards

[ripleyfin]

Have you looked into which VLANs are configured on your switches Trunk ports uplinking to your core switches? They need to be tagged, all VLANs on your Trunk Uplinks or else your untagged ports won't work https://mobdro.bio/ .