Configure Windows IPSec VPN with FortiManager

[jdsauer77]

Is there a way to use FortiManager to build Windows Client Native IPSec tunnels? I know I can do it directly on the device, but wasn't sure if there was a way to centralize it using FMG instead.

FMG 7.2.8 (updating to 7.2.9 when the vm image is available)

FGT 60F - 7.2.10

I know I can do it directly on the FGT, but was hoping there was a way to do it via VPN Manager in FMG to keep everything consistent.

[Dhruvin_patel]

Greetings!

FortiManager's VPN Manager does not directly support configuring Windows Client Native IPSec tunnels. It will help to manage site-to-site VPN connections between FortiGate devices

While FortiManager doesn't offer a centralized way to manage these specific client-to-site VPN connections through its VPN Manager, you can still use FortiManager to push consistent configurations to your FortiGate devices.

Regards!

If you have found a solution, please like and accept it to make it easily accessible for others.

[Dhruvin_patel · Accepted solution]

Greetings!

Yes, Import the FortiGate configuration into FortiManager and maintain the changes as part of the FortiManager database to ensure consistency.

Regards!

If you have found a solution, please like and accept it to make it easily accessible for others.