Configure IPSEC remote access vpn on Fortimanager

[hamidreza]

I have a problem. How can I configure an IPsec remote access VPN on FortiManager 7.4.5 and assign it to our Fortigate?

I found many documents and videos about hub-to-hub and hub-and-spoke solutions, but unfortunately, I couldn’t find any solution explaining how to set up IPsec remote access VPN.

Can anyone help me with that?

[Stephen_G]

Hello,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

[funkylicious]

Hi,

You would do it basically in the same tab in FortiManager > VPN Manager , 

https://docs.fortinet.com/document/fortimanager/7.4.5/administration-guide/469229/creating-ipsec-vpn... 

https://docs.fortinet.com/document/fortimanager/7.4.5/administration-guide/414793/vpn-community-sett...

[jitendra2]

I have a problem. How can I configure an IPsec remote access VPN on FortiManager 7.4.5 and assign it to our Fortigate?

I found many documents and videos about hub-to-hub and hub-and-spoke solutions, but unfortunately, I couldn’t find any solution explaining how to set up IPsec remote access VPN.

Can anyone help me with that?

[smkml]

Hi @jitendra2 ,

You may refer below KB for the request, which may be helpful in your case.
https://community.fortinet.com/t5/FortiManager/Technical-Tip-Build-Dialup-IPsec-tunnel-using-VPN-Man...
https://community.fortinet.com/t5/FortiManager/Troubleshooting-Tip-Remote-Access-Topology-in-VPN-Man...