Configure DHCP on 201F

[Ashraf_Gafar]

Hi 

I need to configure DHCP on 201F , I have more than 300 users, what is best way (range , subnet )and how to do that ?

Thanks 

[Ashraf_Gafar · Accepted solution]

Ok , How about going with this range 172.16.0.0 with mask /252. Is it will work for me? Also can I do this with one interface ?

Do I need additional configuration to let this range see each other and going to internet?

[rosatechnocrat]

Dear Ashraf,

You can use the range with a subnet mask.  Also, have the FGT interface configured with a bigger mask rather than /24 as it will contain only around 250 IP addresses. 

[Ashraf_Gafar · Accepted solution]

Ok , How about going with this range 172.16.0.0 with mask /252. Is it will work for me? Also can I do this with one interface ?

Do I need additional configuration to let this range see each other and going to internet?

[rosatechnocrat]

Dear Ashraf,

Yes 172.16.0.0 will work, subnet will be 255.255.0.0 . I didn't get what do you mean /252. Yes You can do with one interface only. 

[knagaraju · Accepted solution]

Hello Ashraf,

Since you need 300 IP addresses. As an example, you can take 172.16.0.0/23.
In total, you will have 510 IP addresses.  Please see the below screenshot for details.

Regards,
Nagaraju.

[Ashraf_Gafar]

Ok good :thumbs_up: , it's seem fine I will try do that.

Thanks