Configuration Backup

[satyams]

Hi Can some body confirm me the command from CLI to take full configuration back of this device (Fortianalyzer 4000B version 5.0.6). Appreciate you help. thanks Satya

[AtiT]

Hi According to release notes for version 5.0.6 it should be: Optionally, you can backup the configuration file to a FTP, SFTP, or SCP server using the following CLI command: execute backup all-settings {ftp | sftp} <server IP address> <path/filename to the server> <user name on server> <password> [cryptpasswd] execute backup all-settings scp <server IP address> <path/filename to the server> <user name on server> <SSH certificate> <crptpassrd> I tried the FTP command and it worked for me.

[satyams]

Is there any CLI command that see the configuration on the device itself? e.g ' sh run' on cisco devices Satya

[pcraponi]

# show full-configuration If you want disable the " -- More --" # config system console # set output standard # end regards, Paulo Raponi

[satyams]

I tried this command is not working on this model.

[Dave_Hall]

Currently do not have access to our Fortianalyzer to confirm this, but I think you need to switch to global first then perform the above mentioned steps. eg. config global show full-configuration

[satyams]

Just running “show” command displaying the configuration. For Backup via ftp/sftp, can we specify the filename to be used? because when I try to specify the filename it gives below error. test# execute backup all-settings sftp 192.168.2.2 test.tmp user password Starting backup all settings in background, Please wait. test # Starting transfer the backup file to FTP server... Error rename file: /var/fwcl1ienttemp/fmg_cl1ibackup.dat to ./test.tmp Failed to backup all-settings due to SFTP transaction! Backup all settings...Failed.

[FortiOSman]

FAZ 100C 5.2.7

typing 'show' at the console will show the running config

FortiOSman

Up, Up, and Away!

[sotir1984]

I know that it's an old post, but for future:

execute backup all-settings sftp 10.1.14.88 SFTP/ backup Restore1234

So not to receive an error that you had just leave the filename blank.

"SFTP" is the folder on the server.

[dpround]

Note the "/" at the end of the path is vital or you will get a random error.