Hi all,
I'm trying to remotely troubleshoot some VPN issues on a 140D running 5.2.4
In the past (on older firmware, on another device...) I've used the command 'diagnose debug application ike -1' and it will return very verbose information on what the VPN tunnels are doing or trying to do.
I have made sure to run diag debug enable also
However, running the command on this other device returns nothing. If i bring the interface down/up I get the following only
2016-06-10 06:14:42 ike config change 2016-06-10 06:14:44 ike 0:VPNxxx01: is admin up 2016-06-10 06:14:48 ike config update start 2016-06-10 06:14:48 ike config update done 2016-06-10 06:14:49 ike 0: cache rebuild done
Am I missing something, or using the wrong command? Or, do I need to enable logging somewhere else on the device before I can see all the information that I'm used to seeing when running this command?
Thanks!
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.