Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
dan231
New Contributor

Cisco VPN Routing via 2nd public IP

I have been at this for 3 days now.

My Watchguard gave out and I am trying to get a FortiWIFI setup in the interim before I can get a real enterprise level firewall in.

 

I have Cisco 1841 VPN from a 3rd party to my LAN.

The setup should be simple enough.  Public IP --> Cisco --> 192.x.x.2 --> Firewall 192.x.x.1 --> W2 LAN

I have my 192.x.x.1 assigned to Port 1 on the FortiWIFI and a policy setup for All traffic from port 1 to WAN2 and All Wan2 to Port1.  This is basically the exact same setup as the Watchguard.

 

I have confirmation from my 3rd party vendor that the VPN is up and they see traffic coming from my host.  The problem is that my host still shows as offline.  I am thinking the routing is still wrong.

 

Does anyone have suggestions for me on what to review?

1 REPLY 1
dan231
New Contributor

I was missing an entire route. 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors