Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
marcelo_malara
New Contributor

Change VPN SSL interface

Hi guys.

 

I have two Fortinets 80C in cluster. I configured the VPN SSL access some time ago on WAN1, it worked fine. Now I need to move the VPN SSL to WAN2, changed in VPN->SSL->Settings ->Listen on interface from WAN1 to WAN2, port 10443, but neither the client not the web page works. The client stops at 10%. It seems the port 10443 is not listening. Restarted the VPN SSL Daemon to no effect, rebooted both nodes to no effect.

 

Is something more I have to change?

 

Regards

 

 

 

 

 

12 REPLIES 12
marcelo_malara

Hi guys, for anyone interested, I manage to partially solve this. The issue is that if I choose the port 10443 the is no command:

 

set port 10443

 

...visible in a backup file, whereas if in the VPN config I choose port 10444, I can find the command and the VPN works ok.

Dirty_Wizard_FTNT

It is not showing in the config file because 10443 is the default port.

 

You should debug flow the traffic.

 

You may have 10443 used elsewhere like a VIP.

 

Grep for it in the whole config:

 

show full-configuration | grep -f 10443

marcelo_malara

Nothing shown with that command.

 

Regards

 

Labels
Top Kudoed Authors