Change Fortigate VDOM from Transparent to NAT

[jbudi1]

Hello,

I want to change one of the VDOM from Transparent to NAT. I plan to do this step :

1. Login web UI

2. Choose Global Mode

3. Go To System > VDOM

4. Edit VDOM

5. Change Operation Mode from Transparent to NAT Mode

6. Configure IP Address in the VDOM interface

is there anything else that needs to be done ?

Thanks

[mgoswami · Accepted solution]

Hi,

Yes the above mentioned steps are correct. Additionally, you may also refer to these links for any configuration in NAT mode and Transparent Mode VDOM:

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-create-VDOM-with-Transparent-mode/t...

https://docs.fortinet.com/document/fortigate/6.2.15/cookbook/986787/nat-and-transparent-mode

BR,

Manosh