Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
jbudi1
New Contributor

Change Fortigate VDOM from Transparent to NAT

Hello,

I want to change one of the VDOM from Transparent to NAT. I plan to do this step :

1. Login web UI

2. Choose Global Mode

3. Go To System > VDOM

4. Edit VDOM

5. Change Operation Mode from Transparent to NAT Mode

6. Configure IP Address in the VDOM interface

 

is there anything else that needs to be done ?

 

Thanks

1 Solution
mgoswami
Staff
Staff

Hi,

 

Yes the above mentioned steps are correct. Additionally, you may also refer to these links for any configuration in NAT mode and Transparent Mode VDOM:

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-create-VDOM-with-Transparent-mode/t...

 

https://docs.fortinet.com/document/fortigate/6.2.15/cookbook/986787/nat-and-transparent-mode

BR,

Manosh

View solution in original post

1 REPLY 1
mgoswami
Staff
Staff

Hi,

 

Yes the above mentioned steps are correct. Additionally, you may also refer to these links for any configuration in NAT mode and Transparent Mode VDOM:

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-create-VDOM-with-Transparent-mode/t...

 

https://docs.fortinet.com/document/fortigate/6.2.15/cookbook/986787/nat-and-transparent-mode

BR,

Manosh

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors