- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Captive portal
Hello everyone, i working on new job and there is FortiGate 100F (i`am new to fortios)
Users pass captive portal authorization for internet access, but Security mode on Lan Interface is disabled,
also didn't find anything at config.
FortiOS cookbook shows that captive portal configurate at Interfaces, where another places i can find current settings of captive portal?
FortiOS 6.2.16
FortiGate #FortiOS 6.2.12
Solved! Go to Solution.
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Kengessov,
Captive portal must have be called via the firewall policy. Even if the firewall policy has user/user group configured then the captive portal will get trigger
Salon Raj Joshi
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @Kengessov
You can check if captive portal is enabled on SSID , as well check the in User & Authenitcation- Authentication Settings if its enabled Captive Portal.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for reply, checked SSID and also just "Authentication settings", but still couldn't find where is captive portal enabled.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You have to change the Security mode to Captive Portal:
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Kengessov,
Captive portal must have be called via the firewall policy. Even if the firewall policy has user/user group configured then the captive portal will get trigger
Salon Raj Joshi