Hi Guys
Starting two weeks ego my FGT200E web UI stopped responding, giving ERR_CONNECTION_REFUSED
nosing and diagnosing, it appears that the HTTPS daemon is not running
did some top commands and
#dia sys process pidof httpsd
gives no answer, nor the top shows any httpsd daemon runs on the system
I also restarted the box two days ego, and still no HTTPS access
i run the FortiGate-200E v6.4.10,build2000,220824 (GA.M)
What would be the next step
Appriciate
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
ok - issue resolved
it was the admin cert issue
so what was done is
config system global
set admin-server-cert self-sign
end
and Web-ui came back as new
thanks
Please check get system global | grep admin-server-cert, and make sure that some certificate is selected. I've seen similar behaviour a few times in the past when the admin GUI certificate mysteriously became un-configured.
Thanks for posting
i typed and got an empty line .. i am not sure what was before
i guess it should contain the factory cert ?
ok - issue resolved
it was the admin cert issue
so what was done is
config system global
set admin-server-cert self-sign
end
and Web-ui came back as new
thanks
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1632 | |
1063 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.