Hi all,
We have some handheld android tablets on a "guest" network on our Fortigate 100F and they get an IP address of say 192.168.30.0 and we have a server on a DMZ on another interface on say 10.10.10.10 but all connected to the same physical 100F. The tablets connect to the server fine when they are off our network (i.e at 3rd party sites etc) but they cannot connect to the server when inside our network (on the Guest network). If i do a trace route then it picks up that it needs to go to 10.10.10.10 but hits the guest interface on the router (so 192.168.30.1) but then the next hop is our WAN IP address instead of the interface IP of our DMZ network? What do i need to do to get it to route "internally" ?
Hope that makes sense.
Thanks
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello
No need to add a route since the networks are directly connected to FGT.
Check the following:
Hello
No need to add a route since the networks are directly connected to FGT.
Check the following:
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.