Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Tutek_OLD
New Contributor

Cannot connect Fortigate to Mikrotik using Ipsec

Hi, I'm trying to connect Mikrotik with Fortigate using Gre over Ipsec but I'm stuck already on Ipsec Phase 1 exchange, maybe could anyone help me? Fortigate config:

config vpn ipsec phase1-interface
    edit "ipsec_p1"
        set interface "port16"
        set ike-version 2
        set local-gw FGT_WAN
        set keylife 3600
        set peertype any
        set net-device disable
        set proposal aes256-sha256
        set dhgrp 21
        set remote-gw MIKROTIK_WAN
        set psksecret password
    next
end
config vpn ipsec phase2-interface
    edit "ipsec_p2"
        set phase1name "ipsec_p1"
        set proposal aes256-sha256
        set dhgrp 21
        set encapsulation transport-mode
        set protocol 47
    next
end

 

Mikrotik config:

/ip ipsec policy group
add name=group1

/ip ipsec profile> print
Flags: * - default
 1 name="FGT" hash-algorithm=sha512 enc-algorithm=aes-256 dh-group=ecp521 lifetime=1d
     proposal-check=obey nat-traversal=yes dpd-interval=disable-dpd

/ip ipsec peer> print
Flags: X - disabled, D - dynamic, R - responder
 0 name="FGT" address=FGT_WAN/32 local-address=MIKROTIK_WAN port=500
       profile=FGT exchange-mode=ike2 send-initial-contact=yes
       
/ip ipsec proposal> print
Flags: X - disabled, * - default
 1 name="FGT" auth-algorithms=sha256 enc-algorithms=aes-256-cbc lifetime=0s
      pfs-group=ecp521
      
 /ip ipsec identity> print
Flags: D - dynamic, X - disabled
      peer=FGT auth-method=pre-shared-key secret="password" generate-policy=no
      
/ip ipsec policy> print
Flags: T - template, X - disabled, D - dynamic, I - invalid, A - active, * - default
 1 src-address=MIKROTIK_WAN/32 src-port=any dst-address=FGT_WAN/32 dst-port=any
       protocol=all action=encrypt level=require ipsec-protocols=esp tunnel=no
       proposal=FGT ph2-count=0

 

Fortigate debug:

FGT # ike 0: comes MIKROTIK_WAN:500->FORTIGATE_WAN:500,ifindex=22....
ike 0: IKEv2 exchange=SA_INIT id=7db77dde33559db9/0000000000000000 len=300
ike 0: in 7DB77DDE33559DB9000000000000000029202208000000000000012C2900001C000040058127764BBADB7244D1E0779C7B6DB9E7F017782D2800001C000040040C756A50A4894E77195676AE85309213A81D7AEA2200001CAF2203E8EE1329DDF0FCA70E3F6E459E34A50CBEFE0EEA7B2100008C0015000000019347E6A359CE73A61BAC722E10AAD7349FF180904339F3CBC0CDAF
ike 0:7db77dde33559db9/0000000000000000:296: responder received SA_INIT msg
ike 0:7db77dde33559db9/0000000000000000:296: received notify type NAT_DETECTION_DESTINATION_IP
ike 0:7db77dde33559db9/0000000000000000:296: received notify type NAT_DETECTION_SOURCE_IP
ike 0:7db77dde33559db9/0000000000000000:296: incoming proposal:
ike 0:7db77dde33559db9/0000000000000000:296: proposal id = 1:
ike 0:7db77dde33559db9/0000000000000000:296: protocol = IKEv2:
ike 0:7db77dde33559db9/0000000000000000:296: encapsulation = IKEv2/none
ike 0:7db77dde33559db9/0000000000000000:296: type=ENCR, val=AES_CBC (key_len = 256)
ike 0:7db77dde33559db9/0000000000000000:296: type=INTEGR, val=AUTH_HMAC_SHA2_512_256
ike 0:7db77dde33559db9/0000000000000000:296: type=PRF, val=PRF_HMAC_SHA2_512
ike 0:7db77dde33559db9/0000000000000000:296: type=DH_GROUP, val=ECP521.
ike 0:7db77dde33559db9/0000000000000000:296: no proposal chosen
ike Negotiate SA Error: ike ike [10366]
 

12 REPLIES 12
alexsunny123

Thanks my issue has been fixed.

tahirriaz
New Contributor

i configure gre tunnel between fortigate firewall and mikrotik router and ping response on both gateway but internet is not working please help me

saltbaythree
New Contributor

I am trying to establish an IPSec connection with a fortinet (that I dont have any control over) and I am having dificulties getting it done.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors