Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Hugo_M_
New Contributor

Cannot connect Fortigate 600 with SMNPv3 to HP IMC Engine

Hi:   We are trying to connect a fortigate 600D to HP IMC NMS.

When all is configured and we try to test connection, we get this error:

Failure

Possible causes: 1. The device cannot be pinged. 2. SNMP settings/Telnet settings/SSH settings is incorrect. 3. Invalid characters are found. 4. device returns a failure.

 

I have tested  all combinations of authentication/no authentication, privacy, not privacy, short user, longuser, etc. and always get the same error.

I only get working SNMPv1 or SNMPv2 with fortigate but if only complete the READ-ONLY community.

If i complete the read-write community, IMC return the same error as SNMPv3 when try to test with TEST BUTTON.

Using HP IMC 7.2

Last version of fortinet mibs installed and compiled sucessfully

Any help or hint will be welcomed.

Regards

 

Thanks in advance.

Hugo

 

 

__________________________________

Hugo J. M.

__________________________________ Hugo J. M.
1 REPLY 1
emnoc
Esteemed Contributor III

The cli diag debug app snmpd -1  would be the best approach and  show configurations

 

 

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
Labels
Top Kudoed Authors