Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
mia
New Contributor II

Cannot configure fortigate while is registered on fortimanager

Hi, I cannot configure a fortigate while is registered under a fortimanager 400A with an user with limited permission: read-only on all section except firewall and utm that are in read-write mode. All the web-ui result in read-only mode. Can anybody help? Thanks a lot
4 REPLIES 4
ddskier
Contributor

I believe a later firmware version of the Fortigate devices give you the option for read or read-write for the entire firewall.

-DDSkier FCNSA, FCNSP FortiGate 400D, (2) 200D, (12) 100D, (2) 60D

-DDSkier FCNSA, FCNSP FortiGate 400D, (2) 200D, (12) 100D, (2) 60D
mia
New Contributor II

Ok, I' m waiting for latest release. Best Regards
David_Harris1
New Contributor

Has anyone figured out a way around this. To be able to configure a fortigate directly via its web UI while registered under a FortiManager. When I login it is all read-only. The UI says: This FortiGate is currently managed by a FortiManager Device. All changes should be performed from FortiManager to avoid conflict.
ddskier

The later version of MR3 on the fortigate units allow you to click the " continue" button to gain local web-interface modification access directly on the firewall.

-DDSkier FCNSA, FCNSP FortiGate 400D, (2) 200D, (12) 100D, (2) 60D

-DDSkier FCNSA, FCNSP FortiGate 400D, (2) 200D, (12) 100D, (2) 60D
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors