I wasn't able to connect to an IPsec VPN through FortiClient VPN (7.0.2.0090 free) when updated to Windows 11 (build 22000), SSL VPNs were working fine. When I downgraded to Windows 10 (21h2 build 19044.1415) the IPsec VPN started working again.
This is the error that I got on FortiClient
And this is the log that I exported
12/28/2021 4:02:55 PM info sslvpn date=2021-12-28 time=16:02:54 logver=1 id=96602 type=securityevent subtype=sslvpn eventtype=status level=info uid=19AEBE88942A48F59578C42AA765D590 devid=FCT8003159070034 hostname=DESKTOP-5BJFTJ3 pcdomain=N/A deviceip=192.168.224.1 devicemac=<redacted> site=N/A fctver=7.0.2.0090 fgtserial=FCT8003159070034 emsserial=N/A os="Microsoft Windows 11 , 64-bit (build 22000)" user=bueno msg="SSLVPN service started successfully" vpnstate=
12/28/2021 4:03:04 PM info system date=2021-12-28 time=16:03:03 logver=1 id=96823 type=systemevent subtype=system eventtype=status level=info uid=19AEBE88942A48F59578C42AA765D590 devid=FCT8003159070034 hostname=DESKTOP-5BJFTJ3 pcdomain=N/A deviceip=192.168.224.1 devicemac=<redacted> site=N/A fctver=7.0.2.0090 fgtserial=FCT8003159070034 emsserial=N/A os="Microsoft Windows 11 , 64-bit (build 22000)" user=bueno msg="Checking for updates"
12/28/2021 4:04:26 PM info ipsecvpn date=2021-12-28 time=16:04:25 logver=1 id=96566 type=securityevent subtype=ipsecvpn eventtype=status level=info uid=19AEBE88942A48F59578C42AA765D590 devid=FCT8003159070034 hostname=DESKTOP-5BJFTJ3 pcdomain=N/A deviceip=192.168.224.1 devicemac=<redacted> site=N/A fctver=7.0.2.0090 fgtserial=FCT8003159070034 emsserial=N/A os="Microsoft Windows 11 , 64-bit (build 22000)" user=bueno msg="loc_ip=192.168.100.2 loc_port=500 rem_ip=<vpn-external-ip> rem_port=500 out_if=0 vpn_tunnel=RS IPsec action=negotiate init=local mode=aggressive stage=1 dir=outbound status=success Initiator: sent <vpn-external-ip> aggressive mode message #1 (OK)" vpntunnel="RS IPsec"
12/28/2021 4:04:38 PM warning ipsecvpn date=2021-12-28 time=16:04:37 logver=1 id=96561 type=securityevent subtype=ipsecvpn eventtype=error level=warning uid=19AEBE88942A48F59578C42AA765D590 devid=FCT8003159070034 hostname=DESKTOP-5BJFTJ3 pcdomain=N/A deviceip=192.168.224.1 devicemac=<redacted> site=N/A fctver=7.0.2.0090 fgtserial=FCT8003159070034 emsserial=N/A os="Microsoft Windows 11 , 64-bit (build 22000)" user=bueno msg="No response from the peer, phase1 retransmit reaches maximum count" vpntunnel="RS IPsec" locip=192.168.100.2 locport=500 remip=<vpn-external-ip> remport=500
This is a log exported after a successful connection (in W10)
12/30/2021 8:24:23 AM info ipsecvpn date=2021-12-30 time=08:24:22 logver=1 id=96566 type=securityevent subtype=ipsecvpn eventtype=status level=info uid=19AEBE88942A48F59578C42AA765D590 devid=FCT8003159070034 hostname=DESKTOP-5BJFTJ3 pcdomain=N/A deviceip=<my-external-ip> devicemac=<redacted> site=N/A fctver=7.0.2.0090 fgtserial=FCT8003159070034 emsserial=N/A os="Microsoft Windows 10 , 64-bit (build 19041)" user=bueno msg="loc_ip=192.168.100.2 loc_port=4500 rem_ip=<vpn-external-ip> rem_port=4500 out_if=0 vpn_tunnel=CIEE-RS action=negotiate init=local mode=quick stage=2 dir=outbound status=success Initiator: sent <vpn-external-ip> quick mode message #2 (DONE)" vpntunnel=CIEE-RS
In this log the loc_port and rem_port are different (4500, in the other log it's 500), also the deviceip is my external IP, not a local IP (that doesn't look like an IP that my machine would be using).
I don't know if that's causing the problem, but it's all I can find.
Does anyone have any tips?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Created on 02-15-2022 11:08 AM Edited on 02-15-2022 11:21 AM
I figured out the issue. It is a Windows 11 Ethernet driver issue.
Wifi connects to VPN, Ethernet via USB to Eth adapter works.
I downgraded to Win10 Realtek 10.54 driver version.
That fixed the issue for me.
Realtek PCIe FE / GBE / 2.5G / Gaming Ethernet Family Controller Software - REALTEK
let me know if this works for anyone else.
Now that I'm looking, I do see a Realtek, but it's for the USB (Realtek USB GbE Family Controller).
Other than that, this is what I have:
Primarily I use WIFI when trying to connect to the ipsec VPN.
Try to install the windows 10 on windows 11. That worked for us.(Win10 Auto Installation Program (NDIS)
https://www.realtek.com/en/directly-download?downloadid=0b79af1e7509a5c294810f433179dbe6
Let’s us know it’s working!
Created on 05-02-2023 03:41 PM Edited on 05-02-2023 03:42 PM
Tried installing it and got the following error. After finishing the install it still doesn't connect.
Side-note: Link you sent didn't work, but I followed the download path of the original solution and downloaded the NDIS from there.
Still no luck. All new computers I've been setting up with Windows 11 will not work with IPSec.
Thank you so much! I'll add that I installed the Win10 driver, version number 1.1.4.38. Got it from the LAN driver package from Asus' website.
Identifique seu Controlador de Ethernet: Primeiro, descubra qual é o controlador de Ethernet em seu sistema. No seu caso, você mencionou que resolveu o problema com um driver Realtek PCIe FE/GbE/2.5G. Certifique-se de conhecer o modelo específico do controlador Ethernet.
Faça o Download da Versão do Driver: Acesse o site do fabricante do seu controlador Ethernet (no caso da Realtek, o site da Realtek) e baixe a versão mais recente do driver. No entanto, você mencionou que a versão 10.68 do driver funcionou para você. Portanto, você pode optar por baixar essa versão específica se estiver disponível.
Desinstale o Driver Atual: No Windows 11, desinstale o driver Ethernet atual. Você pode fazer isso acessando "Gerenciador de Dispositivos," localizando o adaptador de rede Ethernet e selecionando a opção de desinstalação. Certifique-se de reiniciar o computador após a desinstalação.
Instale a Nova Versão do Driver: Após reiniciar o computador, instale a nova versão do driver Ethernet que você baixou no passo 2.
Conecte à VPN: Após a instalação do novo driver, tente se conectar à VPN IPsec novamente usando o FortiClient. A conectividade deve ser restaurada.
Obrigado @SkepticSensei
Dec 2023 and this is still valid! I had a RealTek Family Controller on Windows 11 and this Win 10 installer worked for me:
https://www.realtek.com/en/component/zoo/category/pci-8169-8110
It worked! Thanks!
Great informative links
Thanks @SkepticSensei , I just downgraded to 10.54 and everything started working!
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.