Can't connect ipsec vpn

[LucasMo]

Hello,
I'm on a vm with a free license to test fortigate, but i have a problem, i can't connect to the ipsec vpn, i put the screenshot for the configuration so you can see what i do

[hbac]

Hi @LucasMo,

Please collect ike debugs: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Understanding-IPsec-iked-debug-logs/ta-p/2...

Regards, 

[ezhupa]

Can you also show the phase1 parameters on the FCT? 
The IKE debug would need to be run on the FGT while reproducing the issue:
diagnose vpn ike log-filter name <phase1_name>
diagnose debug application ike -1
diagnose debug console timestamp enable
diagnose debug enable

To disable:
diagnose debug disable
diag debug reset

[LucasMo]

Hello again, I changed to version 7.2.7 to have access to ssl vpn, but I still have the problem that when I try to connect, it loads and then tells me "vpn connection disconnected". And when i try to connect with the browser, it say that the ssl version is not compatible. 

[LucasMo]

Here is the error that I have

[hbac]

@LucasMo,

What happened to IPsec VPN? For the new issue, you can refer to https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-SSL-VPN-Debugs-Error-SSL-accept-fail...

Regards, 

[LucasMo]

I stop the ipsec vpn, my boss told me to go for the ssl vpn
but this article didn't help me...

[hbac]

@LucasMo,

Obviously, the commands didn't work. You got command parse error. Please make sure you are using the right command. 

Regards, 

[LucasMo]

I just didn't have the command

[hbac]

@LucasMo,

Which firmware version are you using? Can you provide the output of this command 'show full vpn ssl setting'? 

Regards,