Can't add additional routing addresses

[muellerr64]

Hi,

Trying add to a list of routing addresses to our SSL VPN, and the GUI complains 'invalid input'.  I have 6 subnets listed, and need to add a 7th.  Is there some limit or strange 'special' character issue?  My address names look like this...

10.20.0.0/16

10.21.0.0/16

10.22.0.0/16

10.23.22.0/24

BobsVPNRemote219

JimsVPNRemote220

Tried adding 10.23.23.0/24, it fails, tried adding Subnet23_23...everything I try via the GUI fails with 'invalid input'.  If there is no artificial limit, I'll add via CLI.  Didn't want to do that without understanding the issue, we have 100's of connected remote users, don't need that kind of trouble if the SSLVPN goes down.

This is a v6.0.10 100D.

Ron

[Yurisk]

I've never met a limit in split tunneling. Trying to add 7 networks works just fine for me (6.0.9):

[emnoc]

It would wise to show us what your doing but invalid input seems to indicate one of the following 1> the network # is wrong or 2> the mask is wrong for the network #

Ken Felix

[ede_pfau]

ya, no error if the routes were overlapping.

BTW, I created a /31 route just to see if the GUI prevents this...it doesn't.

[Yurisk]

I've never met a limit in split tunneling. Trying to add 7 networks works just fine for me (6.0.9):