Can t Login through consloe

[ashok_kumar]

Hi friends, When am trying to login into our forti analyzer such error is showing.Can you help me on this?

[ede_pfau]

Try to vary the console speed: 9600 baud, 19200 baud, more or less.

[ashok_kumar]

am tried the same in putty...but not taking.

[FortiRack_Eric]

Some Analyzers and FortiSwitches use diff speed: 115200 check quikstart guide of your model.

[FortiRack_Eric]

And don' t forget to set 8,N,1 and NO handshake.

[ede_pfau]

more or less

I knew when I was writing this I should have enumerated all speeds...geez

[ashok_kumar]

As per quick sheet Baud rate 9600 Data bits 8 Parity None Stop bits 1 Flow Control None. Same has been configured still not getting access

[ashok_kumar]

changed the speed to 115200....but not getting same error

[ashok_kumar]

am trying to use port 1 also but 192.168.1.X Ip address is not accepting