Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
mackdav
New Contributor

Can' t Admin over WAN

Hi all I have a FortiWiFi 60D (running 5.0.7, but this problem first turned up with the previously run version which was 5.0.4) deployed on a Bell Canada DSL connection. My problem is that while I can access the Virtual IP services I have configured, I can' t access the firewall' s HTTPS or SSH service from outside or ping it from the outside. I' ve deployed a bunch of FortiNet firewalls so this should be simple and I can' t for the life of me figure out why it doesn' t work. - interface has ping, https, and ssh enabled on it - https is set to port 8443 - the admin account has the trusted IPs defined correctly - the admin account works, I can use it when I log in (https or ssh) from the inside Interestingly, traceroute (mtr, actually) can connect to it. Does anyone have any idea what I might have missed?
5 REPLIES 5
Matthew_Mollenhauer
New Contributor III

Is it possible the ISP is blocking incoming connections to your IP? It' s not something I' d think a business connection would have, but I have seen it a number of times where a customer has brought a consumer plan as it was cheaper. Regards, Matthew
pchechani_FTNT

Do you know what error logs fortigate is generating while you tried connected to fortigate from outside. It should provide you some hint.
-p
AndreaSoliva
Contributor III

Hi only a hint.....! If you have configured on the FGT a VIP (Incoming NAT) and you configured this VIP with IP only ALL ports will be translated to the internal server this means with only one IP and such a config the FGT is not anymore reachable because as soon as you try to request the IP of FGT used in the VIP all traffic will be translated to internal server configured in the VIP Object. What you can/should do is configure within the VIP Object Port Forward meanign only forward specific port to internal server. If within this port forward a port is used overlapping with the port of Admin FGT you should move the admin port to another one. This means if you have VIP configured with Port Forward 443 and admin HTTPS is on 443 the admin port from outside world is not anymore reachable. Move admin port to 9443 or whatever. only as mentioned a hint hope this helps have fun Andrea
mackdav

AndriaSoliva had it correct. I was lazy and defined a VIP with all ports back to the Windows server. Breaking it up into two port-specific VIPs for the two services actually being handled and it starts working again. Thanks!
ede_pfau
SuperUser
SuperUser

That was my first idea as well - a VIP defined as the FGT' s WAN IP address. If you can ping it you do not have port forwarding enabled. Theory breaks if you have multiple public addresses in use.
Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors