Can not open modem device FG-60D

[telecosistem]

Hello,

I have a 60D FGT and I am trying to configure a modem-3g but is not recognized by the firewall.

I attach the configuration & troubleshooting

config system modem     set status enable     set phone1 "*99#"     set extra-init1 "“at+cgdcont=1,”IP”,”broadband.windmobile.ca””" end

config system 3g-modem custom     edit 1         set vendor "Huawei"         set model "K3806"         set vendor-id 19d2         set product-id 1013     next end

Troubleshooting

# diagnose sys modem detect usbserial.c: generic_open - failed resubmitting read urb, error -32 Can not open  modem device '/dev/ttyusb0': Broken pipe

Best regards,