Can i disable ipv6 on interface ?

[Bobo_Newbee]

Hi all,

    Can i disable ipv6 on interface ? I have some log on the wan(PPPoE) interface. it's show descriptoin "RADVD Local AdvLinkMTU disagrees with remote site" Event message " our AdvlinkMTU on port xx doesn't agree with fe80::1".  i verify configure on the interface it's show - config ipv6 , -set ipv6-send-adv enable, - ip6-other-flage

Information 

[FG1100E, 7.0.3]

[jintrah_FTNT · Accepted solution]

Hi,

On the interface, you can set the IPv6 mode to static and set ipv6-send-adv disable.

Best regards,

Jin

[Bobo_Newbee]

@jintrah_FTNT  Thank you.