CREATING BGP NEIGHBOR ON SDWAN

[aidnet]

hello guys i have this challenge on BGP neighbor for sdwan 

[funkylicious · Accepted solution]

Hi, 
When you edit the BGP neighbor, there is an option under IPv4 Filtering, which I think you enabled called Allow AS In, which requires to insert a value between 1 and 10

https://docs.fortinet.com/document/fortigate/6.4.4/cli-reference/557620/config-router-bgp

allowas-in IPv4 The maximum number of occurrence of my AS number allowed.

integer  Minimum value: 1 Maximum value: 10

[smkml · Accepted solution]

Hi @aidnet ,

Kindly note on the error that mentioned where need to add the value. From the latest error I can see it pointed out to neighbour-group > VPN1 > allowas-in-vpn4, and probably pointed out in ipv6 too. 

 

[funkylicious · Accepted solution]

hi @smkml , what version of FMG is that ? I cannot see in FMG 7.2.4 that option under Advanced Options.

[aidnet]

Hello I got the Solution I have downgraded the firmware from 7.4.2 to 7.2.5 and now no error

[aidnet]

i got the solution i have changed the firmware to 7.2.5.. and it is cleared

[aidnet]

is there a team can help me remote?

[aidnet]

Hello guys I got the Solution I have downgraded the firmware from 7.4.2 to 7.2.5 and now no error