CLI delta - config system output

slouw · ‎10-29-2023

I have a 60F-3G4G in production and a 40G on test.

I want to do a diff on the show full-config output but I find the output so different that I do some digging.

Why is there such a massive delta in the config system ? output ?

Thanks

kcheng · ‎10-29-2023

The reason behind that is due to VDOM enabled on your FG40F. Some configurations and CLI are only available in global VDOM, hence, when you are in FG-Traffic VDOM, you will not be able to view the configurations for global VDOM.

On the other hand, FG60F does not have VDOM configured, hence, you will be observing all the configurable items with admin privilege.

Cheers,
Kayzie Cheng

If you have found a solution, please like and accept it to make it easily accessible for others.

View solution in original post

kcheng · ‎10-29-2023

Hi @slouw

The reason behind that is due to VDOM enabled on your FG40F. Some configurations and CLI are only available in global VDOM, hence, when you are in FG-Traffic VDOM, you will not be able to view the configurations for global VDOM.

On the other hand, FG60F does not have VDOM configured, hence, you will be observing all the configurable items with admin privilege.

Cheers,
Kayzie Cheng

If you have found a solution, please like and accept it to make it easily accessible for others.

CLI delta - config system output

Nominate a Forum Post for Knowledge Article Creation