CLI Sniffer downst work after update to 7.4.2

[RolandBaumgaertner72]

Hi,

so strange, we did an update for a FG81E Cluster to 7.4.2 and in the CLI we cant do any sniffing:

FG_XXX_Master $ diag sniffer packet any "host 128.1.98.88" 4
Unknown action 0

Always the same, Unkown action 0

Other FGs with also 7.4.2 just work fine.

What can that be?

Thanks!

[hbac]

Hi @RolandBaumgaertner72,

You can't create super admin while logged in as prof admin. I would suggest putting the old super admin and new prof admin backup side by side in Notepad++ and compare them. I believe you can copy settings under 'config system admin' > 'edit admin' from the old to the new one. For example: 

config system admin
edit "admin"
set accprofile "super_admin"
set vdom "root"

unset password      <<< unset password cause I don't think you still remember it. 

(more lines here)
next

end 

Make sure you copy everything to the 'end'. After that, you can try to restore the backup file. 

Regards, 

[AEK]

Since you have HA cluster you can do as you said, remove the slave from the cluster, do all the job on the slave (reset + restore), test it, and if it is 100% ok put it under prod and join the other node to the new cluster.