- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
CLI: PING-option
Hello guys,
i have firewalls modell 60F and 30E and the Two Systems works fine without Problems(Policy,VPN.Static Routes) but i just noticed that i cant do ping-option interface, Source correctly or something else.
one of them had internal 192.168.25.250 and i want to ping 8.8.8.8 but i became always paket lost
[image][/image]
Policy
[image][/image]
the Firewall is with Internet connected on lan4 and Static Routes ist there. i have also 3 VPN UP.
Static routes
[image][/image]
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
post the CLI equivalents of those images. Pictures don't translate on this forum.
Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
youngsters...either it needs to be a video, or a pic...using written language has it's advantages as one has to think it over while typing. Sorry for my rant, it's meant in general.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
yeah pic didn't come out, but on your problem run "diag debug flow" when you execute the ping and see what shows for the src/dst ,that might give some ideal on what happen
Ken Felix
PCNSE
NSE
StrongSwan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Drag-n-drop generation :)
Attached are pics, translated in AWK with base64 piping.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Your cli I thinks is wrong.
Should be:
exec ping-options source 192.168.25.250
To make it use the LAN interface to send the pings.