C9300L-48P-4X dual PoE sharing to a FortiAP 441K

[GK1951]

Can a Cisco C9300L-48P-4X switch be used to fully power a FortiAP 441K via dual PoE sharing, or can dual PoE sharing be accomplished via FortiSwitches only?

[adambomb1219 · Accepted solution]

It will work fine as long as LLDP is enabled on the switch. That being said, that's a 1-gig switch with a 10G MGig capable AP. You are leaving a lot of throughput on the table.

[GK1951]

Understood on the throughput. Trying to power it first, and then manage throughput for now.  Related question, what happens if the 441K only gets 30 watts via a single PoE port on that switch?

[adambomb1219]

It doesn't work. It requires 2x POE or 1xPOE+