I need some support in the configuration of a FortiAP.
I have a specific vlan (with vlan-id 99) for all FortiAPs connected to my FortiGate-firewall. This vlan
is the management-VLAN for the FortiAPs.
My goal is that the FortiAPs broadcast a wifi-network which is bridged to my lan-network (connected to port2 of the FortiGate-firewall). But how to configure it? If I choose "Bridge" as "Tunnel Mode" in the configuration of the SSID then the wireless-clients get an ip-address in the management-vlan of the FortiAPs.
If I choose "Tunnel" as "Tunnel Mode" I get a new (wifi)-interface on the FortiGate-firewall (with the name of the SSID) and I have to define an ip-address/netmask for this wifi-interface.
Would the next step be to create a software-bridge with port2 and the wifi-interface as member ports?
As mentioned above my goal is to have the wifi-clients in the same network as the clients connected to my lan (which is connected to port2).
Can somebody help? Thanks in advance for your assistance. :)