Dear Team,
I have requirement like port 1 and port 2 have to be bridge interface and there is only same Vlan/subnet which is connected to different switch. Please refer the attached snapshot and provide solution, how can I achieve in fortigate.
Thank you in advanced
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
maybe the easiest way would be to create a switch on the FGT that has Port 1 and 2 as members.
Then only the swithch itself has to have an ip in that subnet.
Traffic between the cisco switch will then remain subnet internal and traffic that goes outside the subnet will need some policy (and maybe routing) on the FGT.
--
"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
Hi @Umesh,
I believe that software switch is a way to go. Please refer to this document for more detail https://community.fortinet.com/t5/FortiGate/Technical-Tip-Hardware-switch-Software-switch-VLAN-switc...
Regards,
In addition to the document https://docs.fortinet.com/document/fortigate/6.2.15/cookbook/277799/software-switch
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.