Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
lievendhaese
New Contributor

Bluescreen on Windows 10 with #Forticlient

I'm having issues with FortiClient (7.0.3.0193) on Windows 10 Enterprise (19044.1645) inside a virtual machine (VM-ware)

  • Installation of the Forticlient worked without issues.
  • Configuration of VPN is OK (identical config works on host).
  • Connection gets established according to Forticlient.

Once connected, every communication through the VPN (ping,...) crashes Windows with a blue screen.

  • Stop code: KMODE EXCEPTION NOT HANDLED
  • What failed: ndis.sys

On the host computer everything works without blue screen... Any idea how to solve this?

1 Solution
blaisephilip
New Contributor

The crash was reproducible on my workstation as well:
Windows 10.0.19044
FortiClient 7.0.5.0238
In my case, if the Siemens SIMATIC Automation Tool is installed, the crash becomes reproducible. https://support.industry.siemens.com/cs/de/en/view/98161300
Only a complete reinstall of Windows (including everything) was the solution - until now. (tool uninstall, reg. entry resets etc. did not help) According to a Siemens-forum, tweaking the registry might help, but did not in my case. Finally this comment solved my issue: https://support.industry.siemens.com/forum/us/en/posts/tia-portal-v17-conflict-with-vpn/262291/?page...

In case the added FortiClient NIC adapters have active usage of the SIMATIC Industrial Ethernet (ISO) protocol, at ca. 98% connection status Windows will crash because of an exception in ndis.sys. Solution: see Control Panel --> Network and Sharing Center --> Change adapter settings --> select a FortiClient adapter --> uncheck the entries for special protocol(s), in my case the "SIMATIC Industrial Ethernet (ISO)"
There might be other applications that utilize NIC management and couple a protocol usage to it, which may be a rare but recurring issue in some corporate environments. In case special protocols are in use, activate them only on a separate physical network interface (e.g. USB NIC) to avoid this issue and keep using special industrial applications.

View solution in original post

7 REPLIES 7
Anthony_E
Community Manager
Community Manager

Hello lievendhaese,

 

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

 

Thanks,

Anthony-Fortinet Community Team.
Anthony_E
Community Manager
Community Manager

Hello lievendhaese,

 

I have found this documentation which can be helpful:

 

https://docs.fortinet.com/document/forticlient/7.0.3/windows-release-notes/22791/resolved-issues

 

Could you please tell me if it helped?

If not, we will find another solution to your question.

 

Regards,

Anthony-Fortinet Community Team.
Hendra3005
New Contributor

related to the problem obtained, has it been resolved?

agass1
New Contributor

I also have this issue, running 7.0.5.0238. Any solutions?

blaisephilip
New Contributor

The crash was reproducible on my workstation as well:
Windows 10.0.19044
FortiClient 7.0.5.0238
In my case, if the Siemens SIMATIC Automation Tool is installed, the crash becomes reproducible. https://support.industry.siemens.com/cs/de/en/view/98161300
Only a complete reinstall of Windows (including everything) was the solution - until now. (tool uninstall, reg. entry resets etc. did not help) According to a Siemens-forum, tweaking the registry might help, but did not in my case. Finally this comment solved my issue: https://support.industry.siemens.com/forum/us/en/posts/tia-portal-v17-conflict-with-vpn/262291/?page...

In case the added FortiClient NIC adapters have active usage of the SIMATIC Industrial Ethernet (ISO) protocol, at ca. 98% connection status Windows will crash because of an exception in ndis.sys. Solution: see Control Panel --> Network and Sharing Center --> Change adapter settings --> select a FortiClient adapter --> uncheck the entries for special protocol(s), in my case the "SIMATIC Industrial Ethernet (ISO)"
There might be other applications that utilize NIC management and couple a protocol usage to it, which may be a rare but recurring issue in some corporate environments. In case special protocols are in use, activate them only on a separate physical network interface (e.g. USB NIC) to avoid this issue and keep using special industrial applications.

lievendhaese

I am also using Siemens. But it did not matter if I used those protocols or not.
Disabling all protocols on the VPN adapter solved it.

 
 
Plachy

This actually worked for me! Thank you!

Labels
Top Kudoed Authors