Block gmail.com domain

[fl0at0xff]

Hello ! I'am a newbie with Fortimail and I'm not able to Reject e-mail from gmail senders to my protected domain. I created a new receiving access control that use the sender pattern *@gmail.com and Internal as Recipient Pattern. Thank in advance for your help

[emnoc]

What does  your monitor log  event shows in the WebGUI? But more importantly, did you order the policies correctly ?

It works like a firewall specific matches 1st. The ESA always apply the new polices last in the SEQ ordering.

[fl0at0xff]

Hello and thank you for your response. I just have one policy (Access Control, Receiving) that should block gmail. But When I send an E-mail from Gmail, the logs are very strange. Look my attachement (test-from-gmail.jpg). But the mail is received.

[abelio]

Hello,

it should work if it's on top of another acls catching traffic.

[emnoc]

Agreed 

The log with search on the sender and  ACL policy number will be displayed to show if your access control was match and if so what #

See the attachment and in this example access-control policy #7 was match no other ip policy was matched ( the "0"s )

ken