Basic traffic reports show the incoming or outgoing traffic?

[#1]

I am using FortiGate400. To view log reports, I go to Log&Report>Report Access>Memory May I know this basic traffic report show the incoming traffic or outgoing traffic only or both traffic?

[#2]

Why no body reply me? No one know about that?

[rwpatterson]

Perhaps like me, no one is sure? I only use that monitor to see if there is a abundance of one type of traffic, and I assumed it was both ways. Not sure though. If you run a program like Fireplotter (http://www.fireplotter.com/), that will show you traffic in each direction and what type (to an extent). It is real time, and has a history graph for the past ten minutes or so. Get the demo and check it out. Good luck, and welcome to the forums.

[#4]

rwpatterson, Thank you for reply. Actually I have a lot of this kind of tools. I just wanna to know the report access in the basic traffic reports show the incoming traffic or outgoing traffic only or both way traffic? Who else can I ask for? I had check the documentation. It just mention that the graph is plotted by the collected logs. I am still not sure.

[rwpatterson]

If you have support, shoot off an email. It should be a no brainer for them.

[#6]

I think so. Better I shoot off them an email. Forum is not a good place for asking question.

[abelio]

Forum is not a good place for asking question.

Hey June, maybe you' re badly informed, but this forum is fed by users/administrators/owners of fortinet products; here you have a lot of people kindly share with you their experiences, knowlegde and -overall- time just for free. If you want demand support, use your fortinet support contract.