Basic connectivity issue

[Ihor]

Hello everybody,

I am new to Fortinet (today is the first day when I try to use it) and i encountered the problem with the basic connectivity.

I use FortiGate-3600C v5.0

I have applied the next config in the CLI:

config system interface     edit port1         set ip 1.1.1.1/24     next     edit port2         set ip 2.2.2.1/24     next end config firewall policy     edit 1         set srcintf "any"         set dstintf "any"         set srcaddr "all"         set dstaddr "all"         set action accept         set schedule "always"         set service "ALL"     next end

In the Web interface I saw that packet-capture intercepts the incoming traffic from both ports, but no departing traffic.

In the Policy Tab I saw that counters are not running. So Policy sequence didn't take part...

So I mean that I simply have no connectivity through the device. 

After googling a long time and trying different combinations, including disabling RPF, but that didn't help.

Could anybody point me where my mistake is?

Thanks ahead!