Bandwidth Usage Scales

[graham_morrison]

Good afternoon,

We are running v5.2.3-build0724 150731 on our analyzer.  When we run the bandwidth summary report we get the info but we are wondering can we change the scales so its not MB on the X axis.  Right now it shows the usage below as hovering around the 350MB mark. We only have a 100Mb pipe here at the office so i assuming that should be 35Mbs.

[hzhao_FTNT]

Hi there, X-axis in this chart is for traffic volume, it showed the total sent/received bytes in certain time period.

Regards,

hz

[graham_morrison]

Thanks for the quick reply.  So that's just actual volume of traffic.  Can you get bandwidth usage or is that another report?

[hzhao_FTNT]

You are welcome. We don't have this kind of info in predefined report in 5.2.x, but currently we are working for it on 5.4.0.