Hi,
I have a plan to maximize our WAN connection, is it possible on fortinet (fortigate 100E, firmware 6.02), we have some vlan and 2 WAN connection. Let say VLAN 10 & 20 internet connection through WAN 1, VLAN 30 & 40 through WAN 2, and if WAN 1 problem VLAN 10 & 20 will go to WAN 2, and vice versa. Is that a guide book or example for this case, i have some seacrh but commonly combine 2 WAN.
Appreciate for answer and guidance.
Thank you
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Team,
Please use this article to achieve your requirement:
Also configure link monitor for both wan interface to detect when link is down:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Link-monitor/ta-p/197504
Please check and keep us posted
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1536 | |
1029 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.