Balancing or failover connection

[Agus]

Hi,

I have a plan to maximize our WAN connection, is it possible on fortinet (fortigate 100E, firmware 6.02), we have some vlan and 2 WAN connection. Let say VLAN 10 & 20 internet connection through WAN 1, VLAN 30 & 40 through WAN 2, and if WAN 1 problem VLAN 10 & 20 will go to WAN 2, and vice versa. Is that a guide book or example for this case, i have some seacrh but commonly combine 2 WAN. 

Appreciate for answer and guidance.

Thank you

[seshuganesh]

Hi Team,

Please use this article to achieve your requirement:

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Policy-routes-with-multiple-ISP/ta-p/21094...

Also configure link monitor for both wan interface to detect when link is down:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Link-monitor/ta-p/197504

Please check and keep us posted