Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Sorry to bump this thread, but been running into some issues.
Is it just me, or are the backups you get from SCP not the full backup of the device? I've only just noticed this now that I'm doing some analytics on the files themselves, but they aren't even close to full. On one device, a full backup from the GUI gets me a file with 40,000 lines. A scp backup using sys_config is just shy of 2,200. It doesn't have any vdoms. It's almost useless.
Is there a different command other than sys_config (or fgt-config) to get a proper, full backup?
nbctcp wrote:Ethon,
Can you please show me the steps
nbctcp,
I've attached the script for you. You can change according to your needs.
PS.: Script only for Windows OS.
Elthon Abreu FCNSA v5
Holy,
I've used the Putty Key Generation (Looking in "ProgramFiles\PuTTY" If you have putty installed). There is a variable "Key" on the script file. To create the user "bkp" you can use the config below:
config system admin edit "bkpusr" set trusthost1 "backup IP address only - for best security" set vdom "root" set ssh-public-key1 "ssh-rsa AAAAB3NzaC1yc2EAAAABJQAAAQEAhIasKun...." set password ****** next end
Best regards
Elthon Abreu FCNSA v5
PCNSE
NSE
StrongSwan
PCNSE
NSE
StrongSwan
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1502 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.