BGP route not being accepted into RIB

[blackout]

BGP routes being advertised by neighbour peer, relayed to local BGP peer,

Route shows up under received routes (with soft reconf ON) network 10.0.8.0/25 but is not being propagated into routers routing table

get router info bgp neighbors 172.16.0.9 received-routes
VRF 0 BGP table version is 2, local router ID is 172.16.0.10
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric     LocPrf Weight RouteTag Path
*> 0.0.0.0/0        172.16.0.9                             0        0 65535 3292 65108 44398 65168 ? <-/->
*> 10.0.0.0/25      172.16.0.10     0                      0        0 65535 i <-/->
*> 10.0.1.0/25      172.16.0.10                            0        0 65535 65500 ? <-/->
*> 10.0.2.0/25      172.16.0.10                            0        0 65535 65500 ? <-/->
*> 10.0.3.0/25      172.16.0.10                            0        0 65535 65500 ? <-/->
*> 10.0.8.0/25      172.16.0.9                             0        0 65535 3292 65400 65500 ? <-/->

but not in rib:

get router info routing-table all
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
       O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       V - BGP VPNv4
       * - candidate default

Routing table for VRF=0
B*      0.0.0.0/0 [20/0] via 172.16.0.9 (recursive is directly connected, VLAN22-MPLS), 00:11:44, [1/0]
C       10.0.0.0/30 is directly connected, vlan9-control
C       10.0.1.0/25 is directly connected, VLAN11-Users
C       10.0.2.0/25 is directly connected, VLAN12-aux
C       10.0.3.0/25 is directly connected, VLAN13-Core
C       10.0.4.0/25 is directly connected, VLAN14-dmz
B       10.1.0.0/16 [20/0] via 172.16.0.9 (recursive is directly connected, VLAN22-MPLS), 00:11:44, [1/0]
B       10.15.0.0/16 [20/0] via 172.16.0.9 (recursive is directly connected, VLAN22-MPLS), 00:11:44, [1/0]
B       10.16.155.132/32 [20/0] via 172.16.0.9 (recursive is directly connected, VLAN22-MPLS), 00:11:44, [1/0]
B       10.37.1.24/29 [20/0] via 172.16.0.9 (recursive is directly connected, VLAN22-MPLS), 00:11:44, [1/0]
(ETC)

All other routes from BGP seems to be accepted, but not this one, i have similar issue with routes advertised in the opposite direction. All routing works via 0.0.0.0/0 but if i drop 0.0.0.0/0 via inbound routemap filtering then i cant route to 10.0.8.0/25.

Any ideas? i already talked to ISP (we have MPLS) and theyre blaming me.

[funkylicious]

hi,

i've answered your post in the other thread that was originally created.

please see there my remarks and suggestion.