Azure Fortinet and Default route

[dreet]

hi all,

we have all mpls branches. sites are connected to Azure via expressroute. we would like to have Fortinet in Azure environment. customer want to use Azure Fortinet for internet access by mpls branches.

is it possible to advertise default route from Azure to mpls environment via express route. how we can achieve this.

[dav72]

---

@dreet wrote:

hi all,

we have all mpls branches. sites are connected to Azure via expressroute. we would like to have Fortinet in Azure environment. customer want to use Azure Fortinet for internet access by mpls branches. usps tracking

is it possible to advertise default route from Azure to mpls environment via express route. how we can achieve this.

Yes, it is possible to advertise a default route from Azure to your MPLS environment via ExpressRoute. Here’s a high-level overview of how you can achieve this:

• Set Up ExpressRoute: First, ensure that your ExpressRoute circuit is properly set up and connected to your Azure environment.
• Advertise Default Routes: You can advertise default routes (0.0.0.0/0) to block all internet connectivity to virtual machines deployed within a virtual network and route all traffic out through the ExpressRoute circuit. Default routes are permitted only on Azure private peering sessions.
• Configure Fortinet: Once the routing is set up, you can configure your Fortinet in Azure to handle the internet access for your MPLS branches

This what I can suggest you, may be helpful.

Thank

Dav